Pool Chemicals / Spa Chemicals    Pool Parts / Spa Parts    Pool Supplies    Spa Supplies    Winter Products

 Free Delivery  & *No Sales Tax - Just a Flat Rate $8.95 per order Charge - Click Here for Details
(*except NY residents)

Water Balancers

ALKALINITY INCREASER

THE SAFER ALTERNATIVE TO MURIATIC ACID!

• Raises total alkalinity levels to the safe (non-corrosive) zone

• Stops eye irritation, equipment corrosion, and plaSter etching caused by low alkalinity

• Stabilizes pH balance in pool water 

• Eliminates the demand for unusually large amounts of pH adjusters

• Enables chlorine to work more effectively

• Recommended Dosage:  Use 1-1/2 lbs. of Alkalinity Increaser to raise the alkalinity approximately 10 ppm. 

It is important to keep your pool water in balance to get the most effective use of your chemicals. Test daily to ensure that pH, total alkalinity, calcium hardness and cyanuric acid (stabilizer) are within the correct levels.

pH is the most important factor in controlling you pool water balance.  High pH results in cloudy water, staining, scale, and filtration problems.  Low pH leads to corrosion of metal pipes, etched plaster, rapid loss of chlorine, and irritation to swimmers.

Alkalinity levels must be kept in check in order to control your pH levels.  It is impossible to keep pH in the proper range if alkalinity is not within the desired range.  Also, when total alkalinity drops below 80 ppm, equipment corrosion, plaster, etching and eye irritation can occur.

Calcium hardness is an integral component of water chemistry.  Soft fill water can cause low hardness levels, which leads to the corrosion of pool surfaces and fixtures.

Go To Chemical Index